Monitor System, Meters, and Testers

Tools to determine specific measurements.

Guardian Monitor l Bluelab Connect Stick and Range Extender Pro HM Digital EC Meter 
Pro HM Digital pH Meter l Eco HM Digital EC Tester l Eco HM Digital pH Tester
Pro HM Digital pH Meter with Case l Pro HM Digital EC Meter with Case l Pro HM Digital Meters Protective Case

Product: Guardian Connect In-Line EC/ppm/Temp/pH Monitor

Description: Continuous nutrient solution monitoring system that measures and displays EC/ppm, temperature, and pH levels using an easy-to-read green LED screen.

Stay Connected - interfacing with the Connect Stick allows the user to monitor, data log, and remotely view conductivity, pH and temperature readings.

  • Wall mounted for a simple and clean installation
  • Easy push button pH calibration - once every 6 months
  • No calibration required for conductivity and temperature
  • Flashing alarms tell when readings are out of ideal range
Part Number:  X500-105

Support Documents:
Specification Sheet

 

Product: Bluelab Connect Stick and Range Extender

Description: The Connect Stick and Range Extender boosts the signal range for wireless monitoring of crops.

It features:

  • International power supply (may differ from image show)
  • Increases range or signal strength to Bluelab Connect products
  • Can be combined with range extenders, additional meters or a combination of both
Part Number:  X500-106-EXT

Support Documents:
 Specification Sheet

 

                              Product: Pro HM Digital EC Meter

Description: Testing and monitoring digital meters for receiving the desired results. They easily measure conductivity, TDS, and temperature of water.

Features:
•  Measures electrical conductivity (EC), total dissolved solids (TDS), and 
   temperature
•  UPGRADED: Four scales: μS, mS, ppm, ppt (mS and ppt are new)
•  Two EC-TDS conversion factors - 0.7 and 0.5
•  Automatic Temperature Compensation (ATC) using three temperature 
   coefficients
•  Measurement Range: 0-9990 μS; 0-8560 ppm; 0-9.99 mS; 0-8.56 ppt
•  Digital Calibration (push button) to any point within the meter’s range
•  Auto-off function, data-hold function and low-battery indicator
•  Display: large and easy-to-read LCD screen includes simultaneous temperature
   reading
•  Replaceable Sensor (model SP-C1)
•  Factory Calibrated: The COM-100 meter is calibrated with a 1413 μS solution.
   The meter can be recalibrated with digital calibration using the push buttons, 
   rather than a screwdriver
•  Includes a cap, AAA batteries and lanyard

Part Number:  COM-100

Support Documents:
 Specification Sheet
 Know Your EC Flyer (Irrigation)
 How To Calibrate Your Meters

 

    Product: NEW EC Calibration Solution

Description: Works with both ECO and PRO Models

Features:
•  Individual liquid calibration packets
•  Ready-to-use
•  Box of 20

Part Number:  CP-1000

Support Documents:
 How To Calibrate Your Meters

 

   

 

Product: Replacement Probe for the PRO COM-100

Description: Replaceable EC Meter Probe. Measures EC/PPM/TEMP

Part Number:  SP-C1

Support Documents:
 Know Your EC Flyer (Irrigation)

 

                              Product: Pro HM Digital pH Meter

Description: Testing and monitoring digital meters for receiving the desired results. They easily measure pH, and temperature of water.

Features:
•  Measures pH and temperature
•  Auto-ranging three point calibration with digital fine tuning
•  Includes storage solution in a sponge embedded in a clear cap
•  Waterproof housing (IP-67 rating)
•  Simultaneous temperature display
•  Measurement Range: 0-14 pH
•  Digital automatic calibration (one point), with digital fine tuning
•  Automatic Temperature Compensation (ATC)
•  Auto-off function, data-hold function and low-battery indicator
•  Display: large and easy-to-read LCD screen includes simultaneous 
   temperature reading
•  Replaceable Sensor (model SP-P2)
•  Factory Calibrated: The PH-200 meter is three-point checked and factory 
   calibrated to pH 7.0. It can be re-calibrated to any point in its range with digital    
   calibration using the push buttons
•  Includes a cap, AAA batteries, lanyard, and pH 7.0 buffer

Part Number:  PH-200

Support Documents:
 Specification Sheet
 Know Your pH Flyer (Irrigation)
 Know Your pH Flyer (Animal Health)
 How To Calibrate Your Meters

  

    Product: NEW Calibration and Storage Solution

Description: Works with both ECO and PRO Models

Features:
•  Individual liquid calibration packets
•  Ready-to-use
•  Box of 20

Part Number:  PH-P7

Support Documents:
 How To Calibrate Your Meters

 

    Product: Calibration and Storage Solutions

Description: Works with both ECO and PRO Models

PH-STOR Features:
•  Storage Solution
•  Keeps Probe Balanced
•  Contains Fungicide
•  Helps Probe Last Longer

PH-BUF Features:
•  Calibration Solution
•  Makes Calibration Easy
•  pH Powder Packets
•  Infinite Shelf Life

Part Number:  PH-STOR and PH-BUF

Support Documents:
 How To Calibrate Your Meters

 

   

 

Product: Replacement Probe for the PRO PH-200

Description: Replaceable pH Meter Probe. Measures 0.00 - 14.0 pH

Part Number:  SP-P2

Support Documents:
 Know Your pH Flyer (Irrigation)
 Know Your pH Flyer (Animal Health)

 

              Product: Eco HM Digital EC Tester

Description: Testing and monitoring digital testers for receiving the desired results. They easily measure conductivity, and TDS.

Features:
•  Measures electrical conductivity (EC), total dissolved solids (TDS). Excellent for
   nutrient testing
•  Four scales: EC: μS, mS; TDS: ppm, ppt
•  Automatic Temperature Compensation (ATC)
•  Measurement Range: 0-9990 μS; 0-5000 ppm; 0-9.9 mS; 0-5.0 ppt
•  Digital Calibration (push button) to any point within the tester’s range
•  Auto-off function, data-hold function and low-battery indicator
•  Display: large and easy-to-read LCD screen includes simultaneous temperature reading
•  Includes a protective cap and batteries
•  Factory Calibrated: The COM-80 tester is calibrated with a 1413 μS solution. The tester can 
   be recalibrated with digital calibration using the push buttons

Part Number:  COM-80

Support Documents:
 Specification Sheet
 Know Your EC Flyer (Irrigation)
 How To Calibrate Your Meters

 

                            Product: Eco HM Digital pH Tester

Description: Testing and monitoring digital meters for receiving the desired results. They easily measure conductivity, pH, and temperature of water.

Features:
•  Measures pH and Temperature
•  One-touch automatic digital calibration
•  Simultaneous temperature display
•  Sleek, lightweight design
•  Large LCD display
•  Automatic Temperature Compensation (ATC)
•  Auto-off function, data-hold function and low-battery indicator
•  Includes storage solution in a sponge embedded in a translucent cap
•  Factory Calibrated: The PH-80 tester is factory calibration to pH 7.0. The tester can 
   easily and quickly be recalibrated with digital calibration to pH 4.0, 7.0 or 10.0 using the 
   tester’s simple one-touch process
•  Includes a cap, batteries, storage solution and pH 7.0 buffer

Part Number:  PH-80

Support Documents:
 Specification Sheet
 Know Your pH Flyer (Irrigation)
 Know Your pH Flyer (Animal Health)
 How To Calibrate Your Meters

 

    Product: Pro HM Digital pH Meter with Protective Case

Description: Testing and monitoring digital meter for receiving
the desired results. Easily measures the pH, and temperature of water. Meter comes in a hard-side plastic case, designed to protect the HM meter.

Features:
•  Auto-ranging three point calibration meter with digital fine tuning
•  Waterproof housing
•  Digital automatic calibration 
•  Automatic Temperature Compensation
•  Replaceable Sensor 
•  Injection molded polypropylene case, with triple layer foam for meter    protection, and double lock loops for security   

Part Number:  X600-102-PH

Support Documents:
 Specification Sheet
 Know Your pH Flyer (Irrigation)
 Know Your pH Flyer (Animal Health)
 How To Calibrate Your Meters

 

    Product: Pro HM Digital EC Meter with Protective Case

Description: Testing and monitoring digital meter for receiving the desired results. Easily measures conductivity, TDS, and temperature or water. Meter comes in a hard-side plastic case, designed to protect the HM meter.

Features:
•  UPGRADED: Four scales: μS, mS, ppm, ppt (mS and ppt are new)
•  Two EC-TDS conversion factors - 0.7 and 0.5
•  Automatic Temperature Compensation 
•  Digital Calibration to any point within the meter’s range
•  Replaceable Sensor
•  Injection molded polypropylene case, with triple layer foam for meter    protection, and double lock loops for security   

Part Number:  X600-102-EC

Support Documents:
 Specification Sheet
 Know Your EC Flyer (Irrigation)
 How To Calibrate Your Meters

 

  Product: Pro HM Digital Meters with Protective Case

Description: Testing and monitoring digital meter for receiving
the desired results. Easily measures the pH, and temperature of water. Meter comes in a hard-side plastic case, designed to protect the HM meter.

Features:
•  Injection molded polypropylene case, with triple layer foam for meter    protection, and double lock loops for security   

Part Number:  X600-102

Support Documents:
 Specification Sheet