Mix-Mate

Double Dose Mix-Mate l HC Mix-Mate l Boot Wash Mix-Mate l Push Lever Fill Stations l Sanitizer Station

Dilution Solutions X100-102
Features: Double Dose Mix-Mate doses two chemicals at the same time with temperatures up to 160 degrees F, 1/2" supply line
Construction: Stainless steel mounting
Flow Rates : Up to 4 GPM (2.2 GPM @ 40 psi)
Pressure: 25 - 125 psi
Additional Features: Water-driven proportioner that allows independent dilution of chemicals with differing viscosities and/or dilution ratios
Part Number: X100-102
Support Documents:
Specifications Sheet
Calculator

 

Dilution Solutions X100-103
Features: HC Mix-Mate quickly fills large containers with temperatures up to 160 degrees F, 3/4" supply line
Construction: Stainless steel mounting
Flow Rates : Up to 13 GPM (7.66 GPM @ 40 psi)
Pressure: 40 - 80 psi
Additional Features: Up to 1:1 possible ratios with water thin chemical, 2 tips supplied for 2:1 or 3:1 ratios.
NOTE: Only for use as a filler. Not for use with a gun or wand attached downstream. Won't work with back pressure
Part Number: X100-103
Support Documents:

 

Dilution Solutions X100-103 
Features: Boot Wash Mix-Mate produces medium volume foam applicator for projecting foaming chemicals as a wet, clinging foam.
Construction: Stainless steel mounting
Flow Rates : 1.34 GPM @ 40 psi
Pressure: 40 - 80 psi
Additional Features: Up to 125 psi with 1/2" supply line and 20 color-coded precision metering tips to set dilution ratios.
NOTE: Only for use as a filler. Not for use with a gun or wand attached downstream. Won't work with back pressure
Part Number: BW256F
Support Documents:
Calculator

 


 
Features: The Push Lever Fill Stations are chemical proportioners for accurately diluting a chemical concentrate to the required ratio and filling any sized container with diluted, ready-to-use chemical solution.
Construction: Stainless steel mounting
Flow Rates : High Flow (black injector) 4.0 - 7.3 GPM; Low Flow (white injector) 1.9 - 3.4 GPM; Bottle Fill (blue injector) 0.6 - 1.0 GPM
Pressure: 25 - 125 psi
Additional Features: Temperature up to 160 degrees F. 1/2" minimum supply line. Draws chemical concentrate from any sized container. 20 color-coded metering tips for setting dilution ratios.

Part Number:
1 - Way: X400-126
2 - Way: X400-127
3 - Way: X400-128

 


 
Features: Sanitizer Station is designed for foam cleaning, rinsing, and sanitizing medium to large sized areas where compressed air is not available.
Construction: Stainless steel mounting
Flow Rates :
40 psi: Flow - 4.0 GPM
Foam - 1.34 GPM
Spray - 2.3 GPM
Pressure: 35 - 125 psi
Additional Features: Includes 20 colored metering tips for each injector to set the dilution ratio.
Part Number: X100-104